Description
- ServoCity 2000 Series Dual Mode Servo (25-4, Super Speed)
- Achieves 290RPM high-speed performance
- Operates in two modes for versatility
- Ensures durability with steel gears
- Offers precise 300° rotation control
- Supports dual ball bearing output shaft
The ServoCity 2000 Series Dual Mode Servo (25-4, Super Speed) is an advanced servo motor designed for high-speed applications, achieving rotational speeds up to 290RPM. This servo offers two operational modes: Default Mode and Continuous Rotation Mode. In Default Mode, the servo provides precise positioning feedback, with the position determined by the PWM signal. The Continuous Rotation Mode, accessible via the 3102 Series Dual Mode Servo Programmer, allows for proportional speed control based on the PWM signal. The servo's rotation range in Default Mode can reach up to 300° when used with appropriate controllers or a Servo Travel Tuner. This servo is engineered with a robust steel gear material and dual ball bearing support for the output shaft, ensuring durability and smooth operation. It operates within a voltage range of 4.8V to 7.4V, with varying no-load speeds and stall torques depending on the voltage applied. The servo is equipped with a 5KΩ potentiometer for feedback and features a brushed DC motor type. The connector type is a 3-Pos TJC8 Servo Connector, and the direction of rotation with increasing PWM signal is clockwise.
- 1x ServoCity 2000 Series Dual Mode Servo (25-4, Super Speed)
ZIP File
- Weight: 58g (2.05oz)
- Gear ratio: 67:1
- Output shaft style: H25T spline
- Voltage range: 4.8V - 7.4V
- No-load speed at 4.8V: 0.055 sec/60° (180RPM)
- No-load speed at 6.0V: 0.043 sec/60° (230RPM)
- No-load speed at 7.4V: 0.035 sec/60° (290RPM)
- Stall torque at 4.8V: 55 oz-in (4.0 kg.cm)
- Stall torque at 6.0V: 65 oz-in (4.7 kg.cm)
- Stall torque at 7.4V: 75 oz-in (5.4 kg.cm)
- No-load current at 4.8V: 190mA
- No-load current at 6.0V: 200mA
- No-load current at 7.4V: 230mA
- Stall current at 4.8V: 2,000mA
- Stall current at 6.0V: 2,500mA
- Stall current at 7.4V: 3,000mA
- Maximum PWM range: 500-2500μsec
- Maximum PWM range (continuous): 1000 - 2000μsec
- Travel per μsec: 0.15°/μsec
- Maximum rotation (default mode): 300°
- Pulse amplitude: 3-5V
- Deadband width: 4μsec
- Motor type: Brushed DC
- Feedback style: 5KΩ potentiometer
- Output shaft support: Dual ball bearing
- Gear material: Steel
- Wire length: 11.81" (300mm)
- Wire gauge: 22AWG
- Connector type: 3-Pos TJC8 servo connector [MH-FC]
- Direction with increasing PWM signal: Clockwise